 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin I27145 rev. B 06/02 MTP 3-Phase Rectifier Series THREE PHASE BRIDGE Features Low VF Low profile package Direct Mounting to heatsink Flat-Pin/ Round-Pin versions with PCB solderable terminals Low junction-to-case Thermal Resistance 3500 VRMS insulation voltage UL approval pending Power Module 45 A 75 A 100 A Applications: Power conversion machines Welding UPS SMPS Motor Drives General Purpose & Heavy Duty Applications Description A range of extremely compact three-phase rectifier bridges offering efficient and reliable operation. The low profile package has been specifically conceived to maximize space saving and optimize the electrical layout of the application specific Power Supplies. Major Ratings and Characteristics Parameters IO @ TC IFSM @ 50Hz @ 60Hz It 2 40MT 70MT 100MT 45 100 270 280 365 325 3650 75 80 380 398 724 660 7240 100 80 450 470 1013 920 10130 Units A C A MT...PA @ 50Hz @ 60Hz A2s I t VRRM TSTG range TJ range 2 A2s V C 1400 & 1600 - 40 to 125 - 40 to 150 MT...PB www.irf.com 1 MTP 3-Phase Rectifier Series Bulletin I27145 rev. B 06/02 ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code reverse voltage V 140 160 VRRM, maximum repetitive peak reverse voltage V 1400 1600 VRSM, maximum non-repetitive peak V 1500 1700 IRRM max. @ TJ = 150C mA 5 40-70-100MT140P 40-70-100MT160P Forward Conduction Parameter IO IFSM Maximum DC output current @ Case temperature Maximum peak, one-cycle forward, non-repetitive on state surge current I2t Maximum I2 t for fusing 40MT 45 100 270 280 225 240 365 325 253 240 70MT 75 80 380 398 320 335 724 660 512 467 7240 0.82 9.5 1.45 Ipk = 70A 100MT 100 80 450 470 380 400 1013 920 600 665 10130 0.75 8.1 1.51 Ipk = 100A Units Conditions A C A 120 Rect conduction angle t = 10ms t = 8.3ms t = 10ms t = 8.3ms A2s t = 10ms t = 8.3ms t = 10ms t = 8.3ms A2s V m V TJ = 25C tp = 400s single junction No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Initial TJ = TJ max. I2t VF(TO) rt VFM Maximum I2t for fusing Value of threshold voltage Slope resistance Maximum forward voltage drop 3650 0.78 14.8 1.45 Ipk = 40A t = 0.1 to 10ms, no voltage reapplied @ TJ max. Insulation Table Parameter VINS RMS insulation voltage 40MT 70MT 3500 100MT Units Conditions V TJ = 25oC all terminal shorted f = 50Hz, t = 1s 2 www.irf.com MTP 3-Phase Rectifier Series Bulletin I27145 rev. B 06/02 Thermal and Mechanical Specifications Parameter TJ Tstg RthJC Maximum junction operating temperature range Maximum storage temperature range Maximum thermal resistance, junction to case 0.27 1.6 0.38 2.25 RthCS T wt Maximum thermal resistance, case to heatsink Mounting torque 10% to heatsink Approximate weight 65 g 4 Nm 0.23 1.38 0.29 1.76 0.1 0.19 1.14 0.22 1.29 K/W K/W DC operation per module DC operation per junction 120 Rect condunction angle per module 120 Rect condunction angle per junction Per module. Mounting surface smooth, flat and greased. Heatsink compound thermal conductivity = 0.42W/mK A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. Lubricated threads. 40MT 70MT - 40 to 150 100MT Units Conditions C -40 to 125 C Clearance and Creepage Distances Parameter Clearance (external shortest distance in air between terminals which are not internally short circuited together) Creepage distance (shortest distance along external surface of the insulating material between terminals which are not internally short circuited together) MT...PA 10.9 10.9 MT...PB 12.3 12.3 Units mm mm Ordering Information Table Device Code 10 0 MT 160 P B 1 2 3 4 5 4 7 1 2 3 4 5 Current rating code = 45A = 75A 10 = 100A Circuit configuration code: 0 = 3-Phase Rectifier Bridge Essential part number Voltage code: code x 10 = VRRM (See Voltage Ratings table) Pinout code: A = Flat pins B = Round pins www.irf.com 3 MTP 3-Phase Rectifier Series Bulletin I27145 rev. B 06/02 Outline Table MT...PA (Flat pin) Dimensions in millimeters MT...PB (Round pin) Dimensions in millimeters 4 www.irf.com MTP 3-Phase Rectifier Series Bulletin I27145 rev. B 06/02 Maximum Allowable Case Temperature (C) 160 150 140 130 120 110 100 90 80 0 10 Instantaneous On-state Current (A) 40MT...P R thJC (DC) = 0.27 K/W Per Module 1000 Tj = 25C 100 Tj = 150C 120 (Rect) 10 40MT...P 1 20 30 40 50 0 1 2 3 4 5 6 Total Output Current (A) Fig. 1 - Current Rating Characteristics Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) Instantaneous On-state Voltage (V) Fig. 2 - On-state Voltage Drop Characteristics 250 200 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 150C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 300 250 200 150 100 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T j = 150C No Voltage Reapplied Rated V rrm Reapplied 150 100 40MT...P Per Junction 40MT...P Per Junction 50 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) 50 0.01 0.1 Pulse Train Duration(s) 1 Fig. 3 - Maximum Non-Repetitive Surge Current Fig. 4 - Maximum Non-Repetitive Surge Current 250 Maximum Total Power Loss (W) 40MT...P 200 150 100 50 0 0 Tj = 150C 120 (Rect) 0. 2 K/ 0. W 3 K/ 0.5 W K/ W 0.4 K/ W 1K /W 10 20 30 40 50 Total Output Current (A) 0 30 60 90 120 150 60 Maximum Allowable Ambient Temperature (C) Fig. 5 - Current Rating Nomogram (1 Module Per Heatsink) A hS Rt = 1 0. W K/ a elt -D R www.irf.com 5 MTP 3-Phase Rectifier Series Bulletin I27145 rev. B 06/02 Maximum Allowable Case Temperature (C) 160 Instantaneous On-state Current (A) 1000 70MT...P R thJC(DC) = 0.23 K/W Per Module Tj = 25C Tj = 150C 150 140 130 120 110 100 90 80 70 60 0 100 120 (Rect) 10 70MT...P 1 10 20 30 40 50 60 70 80 Total Output Current (A) 0 1 2 3 4 5 Instantaneous On-state Voltage (V) Fig. 7 - On-state Voltage Drop Characteristics Peak Half Sine Wave On-state Current (A) Fig. 6 - Current Rating Characteristics Peak Half Sine Wave On-state Current (A) 350 300 250 200 150 100 1 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 150C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 400 350 300 250 200 150 100 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T j = 150C No Voltage Reapplied Rated V rrm Reapplied 70MT...P Per Junction 70MT...P Per Junction 10 100 50 0.01 0.1 Pulse Train Duration(s) 1 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 8 - Maximum Non-Repetitive Surge Current Fig. 9 - Maximum Non-Repetitive Surge Current 300 Maximum Total Power Loss (W) 70MT...P A hS Rt 250 200 150 100 50 0 0 Tj = 150C 120 (Rect) K/ W 0.3 K/ W 0.4 K/W 0.5 K/W 1K /W 0. 2 = 1 0. W K/ a elt -D R 20 40 60 0 80 30 60 90 120 150 Total Output Current (A) Maximum Allowable Ambient Temperature (C) Fig. 10 - Current Rating Nomogram (1 Module Per Heatsink) 6 www.irf.com MTP 3-Phase Rectifier Series Bulletin I27145 rev. B 06/02 Maximum Allowable Case Temperature (C) 140 120 100 80 60 40 40 50 60 70 80 90 100 110 120 130 Total Output Current (A) Fig. 11 - Current Rating Characteristics Instantaneous On-state Current (A) 100MT...P R thJC (DC) = 0.19 K/W Per Module 1000 100MT...P 100 120 (Rect) 10 Tj = 150C Tj = 25C 1 0.5 1 1.5 2 2.5 3 3.5 4 Instantaneous On-state Voltage (V) Fig. 12 - On-state Voltage Drop Characteristics Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) 400 350 300 250 200 150 100 1 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 125C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 500 450 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. 400 Initial T j = 125C No Voltage Reapplied 350 Rated V rrm Reapplied 300 250 200 150 100 50 100MT...P Per Junction 100MT...P Per Junction 10 100 0 0.01 0.1 1 10 Number Of Equal Amplitude Half Cycle Current Pulses (N) Pulse Train Duration(s) Fig. 14 - Maximum Non-Repetitive Surge Current Fig. 13 - Maximum Non-Repetitive Surge Current 500 Maximum Total Power Loss (W) 100MT...P 400 300 200 100 0 0 Tj = 150C Rt hS 0.0 A = 5K 0 .0 0.1 /W 25 K/ K/ W W 0.2 K/W 0.3 K/W 0.5 K/W 1 K/W -D elt a R 120 (Rect) 20 40 60 80 Total Output Current (A) 0 30 60 90 120 150 100 Maximum Allowable Ambient Temperature (C) Fig. 15 - Current Rating Nomogram (1 Module Per Heatsink) www.irf.com 7 MTP 3-Phase Rectifier Series Bulletin I27145 rev. B 06/02 Transient Thermal Impedance Z thJC (K/W) 10 Steady State Value RthJC per junction = 1.6 K/W (40MT...P) 1.38 K/W (70MT...P 1.14 K/W (100MT...P) DC Operation) 1 40MT...P 70MT...P 100MT...P 0.1 0.01 0.0001 0.001 0.01 0.1 Square Wave Pulse Duration (s) 1 10 Fig. 16 - Thermal Impedance Z thJC Characteristics Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 06/02 8 www.irf.com |
Price & Availability of 70MT160PB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |